| NSK Hr320/32xj, Timken Set 32, Koyo 320/32 Auto Bearing | d:15 mm; D:24 mm; Dynamic load, C:2.08 kN; Nlim (grease):26,000 rpm; Mass:0.007 kg; Characteristic cage frequency, FTF:0.44 Hz; f0:15.8; Characteristic inner ring frequency, BPFI:7.86 Hz; da min:17 mm; Radial clearance class:CN; |
| SKF NSK NTN Koyo Timken NACHI Kbc Auto/ Truck Wheel Hub Bearing 32217 32218 30220 32314 32313 32310 31313 30311 30313 30314 Agricultural Machinery Bearing | T max.:200 °C; d:42.86 mm; A5:21.4 mm; Designation of bearing:EX209-27G2T20; B1:56.3 mm; S:21.4 mm; A3:2 mm; Weight:1.71 kg; C0:20.8 kN; T min.:-20 °C; |
| Dfsk V29 Headlight 4121020-Va01-A202j | Fatigue limit load, Cu:0.96 kN; overall width:18 mm; Inch - Metric:Metric; f:2.46 mm; d:55 mm; Nlim (oil):9,000 rpm; b min:2.7 mm; a max:2.87 mm; dynamic load capacity:28300 N; fillet radius:1.1 mm; |
| 320/38, 320/38X, Hr320/38 Auto Taper Roller Bearing NSK NTN Koyo Timken | rs min:2.1 mm; Characteristic inner ring frequency, BPFI:8.38 Hz; Brand:SNR; e:0.33; Nlim:4,800 rpm; Fatigue limit load, Cu:33.9 kN; Static load, C0:343 kN; Y1:2.06; Characteristic outer ring frequency, BPF0:5.62 Hz; Y0:2.01; |
| Peb Automobile Bearing, Bearing Wheel Hub | A:68 mm; N:31mm; A2:83.9 mm; Recommended tightening torque for set screw:64 Nm; Weight:16 kg; C:122.85 kN; C0:86.5 kN; e:18 mm; A4:48 mm; T min.:-20 °C; |
| SKF Timken NSK NTN NACHI Koyo IKO Taper Roller Bearing 09067/09196 09074/09194 09074/09194 09074/09194-S 09074/09195 09074/09196 09074/09201 09078/09195 | Designation of bearing:US207-23G2T04; d:36.51 mm; A1:14 mm; Z:30 mm; Designation of housing:FL207N-; Recommended tightening torque for set screw:8 Nm; C:25.7 kN; S:8.5 mm; B:32 mm; J:130 mm; |
| Peb 05075/05185 Inch and Metric Tapered Roller Bearing, | L:167 mm; H:95 mm; T max.:200 °C; H1:19 mm; Designation of housing:PH207-; G:M6x1; S:9.5 mm; H2:140 mm; T min.:-20 °C; C:25.7 kN; |
| SKF Timken NSK NTN NACHI Koyo IKO Taper Roller Bearing 11162/11300 11162/11315 11163/11300 11165X/11315 11590/11520 12168/12303 12175/12303 09078/09196 | e:0.35; ra max:2 mm; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:8.38 Hz; Fatigue limit load, Cu:29.6 kN; b:8.7 mm; Static load, C0:319 kN; Characteristic rolling element frequency, BSF:4.77 Hz; d2:75.3 mm; |